LOVIS for wort in beer, you will love this microviscometer.
Monitor your juice flow on-line.
Verify your Multiwave 3000's calibration.
Anton Paar LOVIS 2000 M/ME เครื่องวัดความหนืดของเบียร์และสาโท รวมทั้งระบบตรวจสอบการผลิตน้ำผลไม้จาก Anton Paar เพื่อการควบคุมคุณภาพการผลิตแบบประหยัด ต่อเนื่อง อัตโนมัติ และถูกต้องแม่นยำ นอกจากนี้วิธีการตรวจสอบการทำงานของเครื่องย่อยสารตัวอย่าง Multiwave ซึ่งจะช่วยให้คุณมีความเชื่อมั่นในเครื่องมือมากขึ้น.
ANTON PAAR: Lovis 2000 M/ME Microviscometer for Beer and Wort
An ideal world in which you can have it all: highly accurate viscosity results from a very small sample volume. Welcome to the world of Lovis 2000 M/ME: This new modular viscometer requires only 100 μL to deliver results with an accuracy of up to 0.5 %. Use Lovis 2000 M/ME, save your sample and gain deep insights into
viscosity.
The Lovis 2000 ME microviscometer module is a rolling-ball viscometer which measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Results are given as relative, kinematic or dynamic viscosity
For additional information email Chullashut Sriubol (chullashut@metrohm.co.th) or call +66(0) 2 298 0864.
ANTON PAAR: on-line Monitoring fruit juice concentrate flows
On-line monitoring systems from Anton Paar in food and beverage production, like this Brix waste water monitoring system prevent massive damages and increase efficiency.
Fruit juice concentrate should not go waste. If fruit juice concentrate ends up in the wastewater stream, damage could be considerable. An undetected leak in the tank, a manhole that wasn't closed properly or any other human or technical defect could lead to loss of raw material, environmental damage and production delays.
Accidental discharge of fruit juice concentrate often remains unnoticed until it is too late.
This is where Anton Paar's monitoring systems step in. They minimise or avoid damage, react fast and work 24/7
Learn more about practical juice concentrate monitoring and other on-line solutions by dowloading the documents below.
For additional information please email Lop Patimapornlert (lop@metrohm.co.th) or call +66(0) 2 298 0864.
ANTON PAAR: Power Check Multiwave 3000
The power check function is used to verify the microwave power calibration. The procedure is the same as described for the power calibration, but at a target power of 1400 W.
The power check function is used to verify the microwave power calibration. The procedure is the same as described for the power calibration, but at a target power of 1400 W
Menu Service\Power Check Mass Of Water [kg]: 1 Target Power[W]: 1400
Measure the start temperature of 1 L water in a Duran glass cup 190 (20 C 5 C) and enter this value. Place the beaker in the center of the chamber
Start the power check
Measure the final temperature and enter the value
If the apparent microwave power deviates from the nominal value by more than 10% a microwave power calibration should be performed. Call us!
For additional information please email Sutthiphong Ekphaophan (service@metrohm.co.th) or call +66(0) 2 298 0864 Ext 710.
Quality Control in food processing and production is essential.
Metrohm Siam provides a significant range of scientific instruments and applications designed especially for these industries. Manufactured by the most renowned companies in their field, the instruments are not only sold and serviced by Metrohm Siam but customers in Thailand, Myanmar, Laos and Cambodia can tap into the vast knowledge and experience of the world’s leading scientists using Metrohm’s on location support and service.
Should you not wish to receive "Metrohm Siam Foodlab" in the future please go to our site below to remove your address from the mailing list for this service. Unsubscribe
Dear Readers,
Anton Paar LOVIS 2000 M/ME เครื่องวัดความหนืดของเบียร์และสาโท รวมทั้งระบบตรวจสอบการผลิตน้ำผลไม้จาก Anton Paar เพื่อการควบคุมคุณภาพการผลิตแบบประหยัด ต่อเนื่อง อัตโนมัติ และถูกต้องแม่นยำ นอกจากนี้วิธีการตรวจสอบการทำงานของเครื่องย่อยสารตัวอย่าง Multiwave ซึ่งจะช่วยให้คุณมีความเชื่อมั่นในเครื่องมือมากขึ้น.
ANTON PAAR: Lovis 2000 M/ME Microviscometer for Beer and Wort
An ideal world in which you can have it all: highly accurate viscosity results from a very small sample volume. Welcome to the world of Lovis 2000 M/ME: This new modular viscometer requires only 100 μL to deliver results with an accuracy of up to 0.5 %. Use Lovis 2000 M/ME, save your sample and gain deep insights into viscosity.
The Lovis 2000 ME microviscometer module is a rolling-ball viscometer which measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Results are given as relative, kinematic or dynamic viscosity
Download:
For additional information email Chullashut Sriubol (chullashut@metrohm.co.th) or call +66(0) 2 298 0864.
ANTON PAAR: on-line Monitoring fruit juice concentrate flows
On-line monitoring systems from Anton Paar in food and beverage production, like this Brix waste water monitoring system prevent massive damages and increase efficiency.
Fruit juice concentrate should not go waste. If fruit juice concentrate ends up in the wastewater stream, damage could be considerable. An undetected leak in the tank, a manhole that wasn't closed properly or any other human or technical defect could lead to loss of raw material, environmental damage and production delays.
Accidental discharge of fruit juice concentrate often remains unnoticed until it is too late.
This is where Anton Paar's monitoring systems step in. They minimise or avoid damage, react fast and work 24/7
Learn more about practical juice concentrate monitoring and other on-line solutions by dowloading the documents below.
Downloads:
For additional information please email Lop Patimapornlert (lop@metrohm.co.th) or call +66(0) 2 298 0864.
ANTON PAAR: Power Check Multiwave 3000
The power check function is used to verify the microwave power calibration. The procedure is the same as described for the power calibration, but at a target power of 1400 W.
The power check function is used to verify the microwave power calibration. The procedure is the same as described for the power calibration, but at a target power of 1400 W
If the apparent microwave power deviates from the nominal value by more than 10% a microwave power calibration should be performed. Call us!
Downloads/Links:
For additional information please email Sutthiphong Ekphaophan (service@metrohm.co.th) or call +66(0) 2 298 0864 Ext 710.
Quality Control in food processing and production is essential.
Metrohm Siam provides a significant range of scientific instruments and applications designed especially for these industries. Manufactured by the most renowned companies in their field, the instruments are not only sold and serviced by Metrohm Siam but customers in Thailand, Myanmar, Laos and Cambodia can tap into the vast knowledge and experience of the world’s leading scientists using Metrohm’s on location support and service.
Should you not wish to receive "Metrohm Siam Foodlab" in the future please go to our site below to remove your address from the mailing list for this service. Unsubscribe
979/111-115
S.M. Tower 33rd Floor
Phahonyothin Road,
Samsennai, Phyathai,
Bangkok 10400
t: +66 2298 0864
f: +66 2298 0865
979/111-115
อาคารเอส.เอ็ม.ทาวเวอร์ ชั้นที่ 33
ถนนพหลโยธิน แขวงสามเสนใน
เขตพญาไท กรุงเทพมหานคร 10400
โทร: +66 2298 0864
แฟกซ์: +66 2298 0865
PT: PetroChemist
TRL: Teaching and Research Lab
Visit our corporate website: metrohm.co.th
See all scientific newsletters